Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
- Swedish pattern
- 90° angled jaws
- jaws with offset teeth in opposite direction
- teeth additionally induction-hardened
- I-beam handle design
- captive adjustin g nut
- red powder-coated, jaws bright ground
- Gripping jaws with specially hardened te eth, hardness approx. 56 HRC
- good access to the workpiece due to slim size of head and joint area
- more output and comfort compared to conventional water pump pliers of the same length: 9-notch adjustment positioni ng for 30 % more gripping capacity
- self-locking on pipes and nuts: no slipping on the workpi ece and low handforce required
- gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: high wear resistance and stable gripping
- box-joint design for high stabilit y due to double guide
- robust construction, insensitive to dirt
- particularly suitabl e for outdoor work
- Pinch guard prevents operators' fingers being pinched
- precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics
- very precisely ground and sharp cutting edg es with very small bevels for exact cutting on delicate electronic components
- also availabl e without bevel for flush cutting
- precision cutting edges additionally induction-hardened, c utting edge hardness approx. 64 HRC
- approx. 20% lighter than conventional electronics pliers
- bolted joint with carefully manufactured joint surfaces for even, low-friction movement thr oughout the entire opening range
- smooth-running double spring for a gentle and even opening< /li>
- ergonomically optimised multi-component handles
- mini-head
- with precision cutting edges for soft, hard and piano wire
- cuts bolts, nails, rivets , etc. up to Ø 5.2 mm
- efficient joint design ensures exceptional cutting performance with li ttle effort
- with recess for easier cutting of thicker wires
- cutting edges additional ly induction-hardened, cutting edge hardness approx. 64 HRC
- with slim multi-component grips without collar for better handling and easier transport
- Opening spring and locking device ar e integrated in the handles for comfortable work and safe transport
Hama
Application: For an absolutely flush cut of soft wires in the electronics industry.
Head shape: Wide, pointed head.
Material: C 70 special tool steel.
Increases your efficiency: Wiha MagicSpring® holding feature holds all Torx® screws in place without a magnet.
Makes handling easier: Always the correct key when you need it.
Saves time: Ensures order: removal and targeted insertion in the holder is child's play.
Application: For setting and tightening TORX® screws in difficult to access areas.
Supplementary information: MagicSpring® from size T6
Easy removal
Quick selection
Nonmagnetic holding feature
It's a common experience. It's not easy to remove individual keys from many L-key holders or place them back in the holder again. With Wiha ErgoStar, you can now say goodbye to such problems as it eliminates them in an ingenious way. Turning one L-key in the holder makes all other keys turn to the side at the same angle, enabling you to remove the key you need quickly and comfortably. A clamping mechanism in the holder makes sure that the keys cannot fall out, regardless of whether the holder is open or closed. Thanks to the MagicSpring® holding feature with its spring steel ring, the L-keys hold all TORX® screws firmly in any position perfectly without *the need of magnets. The set contains thirteen black-oxidised TORX® L-keys in standard sizes. The hanging bracket on the holder allows users to hang the L-key set up directly at their workstation.
Content:
- 1x L-keys TORX®, black oxidised T5 x 72 mm (24313)
- 1x L-keys TORX® MagicSpring®, black oxidised T6 x 80 mm (31233)
- 1x L-keys TORX® MagicSpring®, black oxidised T7 x 88 mm (31234)
- 1x L-keys TORX® MagicSpring®, black oxidised T8 x 101 mm (31235)
- 1x L-keys TORX® MagicSpring®, black oxidised T9 x 111 mm (31236)
- 1x L-keys TORX® MagicSpring®, black oxidised T10 x 121 mm (31237)
- 1x L-keys TORX® MagicSpring®, black oxidised T15 x 136 mm (31238)
- 1x L-keys TORX® MagicSpring®, black oxidised T20 x 148 mm (31239)
- 1x L-keys TORX® MagicSpring®, black oxidised T25 x 163 mm (31240)
- 1x L-keys TORX® MagicSpring®, black oxidised T27 x 176 mm (31241)
- 1x L-keys TORX® MagicSpring®, black oxidised T30 x 191 mm (31242)
- 1x L-keys TORX® MagicSpring®, black oxidised T40 x 210 mm (31243)
- 1x L-keys TORX® MagicSpring®, black oxidised T45 x 232 mm (31244)
- 1x ErgoStar holder
Increases your efficiency: Wiha LiftUp electric saves 75% volume and 50% less weight for 100 % efficiency.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Protects your health: No risk of injury, *all bits stowed safely inside the handle.
Application: Suitable for controlled fastening for live parts up to 1,000 V AC, especially for portable use.
Note: Not for use with bit styles C 6.3 and E 6.3.
Clearly arranged and easy to remove
Saves 75% of space
slimBits allow access to low-lying screws thanks to integrated insulation
Expandable and compatible with EVF products
Safe operation up to 1,000 V AC
The screwdriver with the bit magazine LiftUp electric is the ideal companion for every electrician out on a job. The bit depot hidden in the handle provides space for 6 standard slimBits and extends out of the magazine at the press of a button, making it easy to take out the bits. The time-tested ClicFix holder grips all bits securely and reliably locks them into place. This technology transforms the bit magazine into an all-purpose screwdriver. The magazine bit holder also ensures maximum safety. Both the magazine bit holder and the slimBits that it contains are certified to the international IEC 60900 standard. The slender, 75 mm slimBits ensure perfect access to low-lying screws or spring clips thanks to protective insulation fully integrated into bits in the front section. The twistable cap brings a further advantage, ensuring convenient handling.
6 mm slimBits only to be used in the slimVario® bit holder and slimTorque VDE bit holder (VDE torque system).
Manufactured acc. to IEC 60900.
Content:
- 1x slimBit electric bit Slotted 2.5 mm x 75 mm (34578)
- 1x slimBit electric bit Slotted 3.0 mm x 75 mm (34579)
- 1x slimBit electric bit Slotted 4.0 mm x 75 mm (34580)
- 1x slimBit electric bit Slotted 5.5 mm x 75 mm (34581)
- 1x slimBit electric bit Phillips PH1 x 75 mm (34583)
- 1x slimBit electric bit Phillips PH2 x 75 mm (34584)
Increases your efficiency: Wiha LiftUp electric saves 75% volume and 50% less weight for 100 % efficiency.
Protects your health: No risk of injury, all blades stowed safely inside the handle.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Application: Suitable for controlled fastening for live parts up to 1,000 V AC, especially for portable use.
Note: Not for use with bit styles C 6.3 and E 6.3.
Clearly arranged and easy to remove
Saves 75% of space
slimBits allow access to low-lying screws thanks to integrated insulation
Expandable and compatible with EVF products
Safe operation up to 1,000 V AC
The screwdriver with the bit magazine LiftUp electric is the ideal companion for every electrician out on a job. The bit depot hidden in the handle provides space for 6 standard slimBits and extends out of the magazine at the press of a button, making it easy to take out the bits. The time-tested ClicFix holder grips all bits securely and reliably locks them into place. This technology transforms the bit magazine into an all-purpose screwdriver. The magazine bit holder also ensures maximum safety. Both the magazine bit holder and the slimBits that it contains are certified to the international IEC 60900 standard. The slender, 75 mm slimBits ensure perfect access to low-lying screws or spring clips thanks to protective insulation fully integrated into bits in the front section. The twistable cap brings a further advantage, ensuring convenient handling.
6 mm slimBits only to be used in the slimVario® bit holder and slimTorque VDE bit holder (VDE torque system).
Manufactured acc. to IEC 60900.
Content:
- 1x slimBit electric bit Slotted 3.0 mm x 75 mm (34579)
- 1x slimBit electric bit Slotted 4.0 mm x 75 mm (34580)
- 1x slimBit electric bit Slotted 5.5 mm x 75 mm (34581)
- 1x slimBit electric bit Phillips PH1 x 75 mm (34583)
- 1x slimBit electric bit Phillips PH2 x 75 mm (34584)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ2 x 75 mm (34590)