Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
All prices are net. Packing, transport and taxes will be charged additionally.
Items: 31622
Order-No.
Information
Kraftform Kompakt 50 by WeraBits, holder, keys, nuts
No. 05056656001. When the unique bayonet blade is lowered into the handle, fast, easy screw-driving action is possible, even in the tightest spots! By pushing the clamping sleeve slightly, the bayonet blade can be extended out of the handle and the compact tool becomes a full-sized screwdriver. If the clamping sleeve is pushed again more strongly the bayonet blade can be taken out of the handle, and be used as a machine bit adaptor or can be placed back. Contains the following 12 bits:
slotted sizes 4,5 mm and 5,5 mm - Philips #1 and #2 - Pozidriv #1 and #2 - Torx: TR10, TR15, TR20, TR25, TR30 and TR40. In plastic box.
slotted sizes 4,5 mm and 5,5 mm - Philips #1 and #2 - Pozidriv #1 and #2 - Torx: TR10, TR15, TR20, TR25, TR30 and TR40. In plastic box.
show more
Price: EUR 67.67
4250838503310
Bernstein
Bernstein
ESD Seitenschneider TECHNICline Full Flush 120mm ableitfaehiCutters and Pliers
No. 3-963-15. cutting capacity soft/medium/hard/piano xD8 in mm: 1.0/0.8/0/0 head width 10 mm blade length 8 mm CARE NOTE: High humidity or touching the pliers head with your fingers (sweat) causes rusting. Therefore, the pliers should always be kept dry or protect with oil for storage. If there is any rust on the pliers head, it can be easily removed, with a slight polish. Our ESD tools comply with the following ESD standards DIN EN 61340-5-1, VDE 0300-5-1:2017-07, DIN EN 61340-2-1, VDE 0300-2-1:2016-07, DIN EN 61340-4-6, VDE 0300-4-6:2016-04. We achieve a discharge resistance of 10^6 to 10^9 ohm with the pliers handles. Attention, the use of hand tools alone is not enough to avoid electrostatic charge. For general safety, please use our wrist grounding and ESD mats, for further information see the section workplace equipment. Very fine side cutters with narrow, rounded pliers head. This version is available with flush, semi flush and full flush. The pliers are suitable for cutting general resistance wire, solder wire, winding wire and heating wire (thermocouple wire). Specifically for copper wire, brass wire, steel wire, iron wire, aluminum wire, bonding wire, tin wire, nickel wire, gold wire, silver wire, platinum wire, tungsten copper wire, tungsten wire, glass fiber and kevlar. Please note the cutting capacity in the pliers handles and the care instructions for a longlife of your pliers. For special applications and individual solutions, please contact us, we are pleased to advise you. material ball bearing steel (HRC 63-65) surface without reflection matt polished dissipative between 10^6 and 10^9 ohm length 120 mm weight 75 g Full Flush (without side face, cut completely flush)
show more
Price: EUR 67.23
4250838503334
Bernstein
Bernstein
ESD Seitenschneider TECHNICline Full Flush 120mm ableitfaehiCutters and Pliers
No. 3-966-15. cutting capacity soft/medium/hard/piano xD8 in mm:xA01.0/0.9/0/0 head width 10 mm blade length 8 mm CARE NOTE: High humidity or touching the pliers head with your fingers (sweat) causes rusting. Therefore, the pliers should always be kept dry or protect with oil for storage. If there is any rust on the pliers head, it can be easily removed, with a slight polish. Our ESD tools comply with the following ESD standards DIN EN 61340-5-1, VDE 0300-5-1:2017-07, DIN EN 61340-2-1, VDE 0300-2-1:2016-07, DIN EN 61340-4-6, VDE 0300-4-6:2016-04. We achieve a discharge resistance of 10^6 to 10^9 ohm with the pliers handles. Attention, the use of hand tools alone is not enough to avoid electrostatic charge. For general safety, please use our wrist grounding and ESD mats, for further information see the section workplace equipment. Very fine side cutters with narrow, pointed pliers head. This version is available with semi flush and full flush.The pliers are suitable for cutting general resistance wire, solder wire, winding wire and heating wire (thermocouple wire). Specifically for copper wire, brass wire, steel wire, iron wire, aluminum wire, bonding wire, tin wire, nickel wire, gold wire, silver wire, platinum wire, tungsten copper wire, tungsten wire, glass fiber and kevlar. Please note the cutting capacity in the pliers handles and the care instructions for a longlife of your pliers. For special applications and individual solutions, please contact us, we are pleased to advise you. material ball bearing steel (HRC 63-65) surface without reflection matt polished dissipative between 10^6 and 10^9 ohm length 120 mm weight 75 g Full Flush (without side face, cut completely flush)
show more
Price: EUR 67.23
4250838503372
Bernstein
Bernstein
ESD Seitenschneider TECHNICline Semi Flush 125mm ableitfaehiCutters and Pliers
No. 3-971-15. cutting capacity soft/medium/hard/piano xD8 in mm:xA01.6/1.3/0.7/0 head width 12.5 mm blade length 10 mm CARE NOTE: High humidity or touching the pliers head with your fingers (sweat) causes rusting. Therefore, the pliers should always be kept dry or protect with oil for storage. If there is any rust on the pliers head, it can be easily removed, with a slight polish. Our ESD tools comply with the following ESD standards DIN EN 61340-5-1, VDE 0300-5-1:2017-07, DIN EN 61340-2-1, VDE 0300-2-1:2016-07, DIN EN 61340-4-6, VDE 0300-4-6:2016-04. We achieve a discharge resistance of 10^6 to 10^9 ohm with the pliers handles. Attention, the use of hand tools alone is not enough to avoid electrostatic charge. For general safety, please use our wrist grounding and ESD mats, for further information see the section workplace equipment. Strong side cutters with rounded pliers head. This version is available with flush, semit flush and full flush. The pliers are suitable for cutting general resistance wire, solder wire, winding wire and heating wire (thermocouple wire). Specifically for copper wire, brass wire, steel wire, iron wire, aluminum wire, bonding wire, tin wire, nickel wire, gold wire, silver wire, platinum wire, tungsten copper wire, tungsten wire, glass fiber and kevlar. Please note the cutting capacity in the pliers handles and the care instructions for a longlife of your pliers. For special applications and individual solutions, please contact us, we are pleased to advise you. material ball bearing steel (HRC 63-65) surface without reflection matt polished dissipative between 10^6 and 10^9 ohm length 125 mm weight 80 g Semi Flush (with side face, cut pyramid shape)
show more
Price: EUR 67.23
Nadelfeilen Satz 6-tlg.
No. 5-210. 100% Made in Germany 24 strokes on 1 cm weight 50 g precision mechanic files in high-quality
Price: EUR 19.67
VDE NH-Aufsteckgriff mit Lederstulpe
No. 17-521 VDE. Siemens handle for NH fuses size 00 3, arm protection when interrupting high current intensity (arc). weight 450 g
Price: EUR 66.80
Internal precision circlip plier, bent tipsCutters and Pliers
Inserted tips of highly condensed spring steel, screw joint. Ring size: 12 - 25 mm.
Price: EUR 23.84
ROLLGABELSCHLÜSSEL 12", BRÜNIERT, MAX.SW 34MM, UNVERP.Wrenches
No. 8073 IP.
- ISO 6787, DIN 3117 Form A, ASME B107.8M-1996 und BS 6333
- Hochleistungs-Stahllegierung
- Messskala in mm für genaue Voreinstellung und genaues Messen
- Der Kopf vereint Schlankheit für gute Zugänglichkeit mit hoher Belastbarkeit
- Linksdrehende Schraube
- Brüniert, präzisionsgehärtet und rostschutzbehandelt
- IP: Industrieverpackung
show more
Price: EUR 66.59
STECKSCHLÜSSEL-EINSATZ 1/2", ISOLIERT, 12KANT 27MMBits, holder, keys, nuts
No. 7800DMV-27.
- Isolierte 1/2", Steckschlüssel-Einsätze
- Für Arbeiten an unter Spannung stehenden Werkstücken bis zu 1000 V
- ISO 2725, IEC 60900, VDE-zertifiziert
- Hochleistungs-Stahllegierung
- 2-lagige Isolierung
- Doppelsechskant mit Dynamic-Drive-Profil
- Nicht zum Einsatz mit Maschinen geeignet
show more
Price: EUR 67.17
GEBOGENER DOPPEL-STECKSCHLÜSSEL, 6- U. 12KANT, SW 25MMBits, holder, keys, nuts
No. 28M-25.
- Gebogene Steckschlüssel, metrisch
- ISO 2236
- Werkstoff: Hochleistungs-Stahllegierung
- Doppelsechskant mit Dynamic-Drive-Profil im gekröpften Ende
- Sechskant mit Dynamic-Drive-Profil im geraden Ende
- Mit Öffnung im gekröpften Ende und tiefem Einsatz im geraden Ende, auch auf Gewindestangen einsetzbar
- Verchromte Micro-Matt-Ausführung mit hochwertiger Oberfläche
show more
Price: EUR 66.88