Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
All prices are net. Packing, transport and taxes will be charged additionally.
Items: 31886
Order-No.
Information
Ratchet wrench set, 3/8" 22 pcs. in foam insert (44708)Bits, holder, keys, nuts
No. 44708.
Increases your flexibility: Variably adjustable right or left rotation through switching lever.
Simplifies your work: With a convenient foam insert for clearly structured storage.
Increases your efficiency: Fastening without interruption thanks to a finely toothed ratchet wrench.
Meets your requirements: Precise fitting, robust, and easy to clean.
Product dimensions: 295 x 200 x 40 mm (LxWxD)
Application: For installation and mounting work.
Tightening and loosening strongly tightened hex screws and nuts requires an enormous amount of force. With the nut driver inserts from Wiha the user can easily open any fastening. Every user is excellently equipped with the set consisting of the 18 most popular 3/8" nut driver inserts size 6-24 mm, a ratchet wrench, and three extensions. The included ratchet wrench combined with the selection of nut drivers gives users the required flexibility for their work. When working with the ratchet wrench, the user benefits from the fine toothing with 72 teeth, offering a short return angle. The right or left rotation can be variably adjusted by the integrated switching lever. The combination with the included extensions allow them to conveniently reach deep-set screws and nuts. The nut driver and extensions are mechanically locked. The change is initiated by pressing the activation button. Made of high quality chrome vanadium steel, the nut driver inserts are distinguished by their longevity and robustness, not the least thanks to their corrosion-resistant and easy to clean surface. The entire contents of the set are neatly and clearly stored in a foam insert in which markings help find the suitable nut driver.
Based on DIN 3120 / 3122 / 3124
Content:
- 1x 3/8" x 178 mm (33701)
- 1x Nut driver insert 3/8" double hex 6.0 mm x 28 mm (44690)
- 1x Nut driver insert 3/8" double hex 7.0 mm x 28 mm (44691)
- 1x Nut driver insert 3/8" double hex 8.0 mm x 28 mm (33723)
- 1x Nut driver insert 3/8" double hex 9.0 mm x 28 mm (44693)
- 1x Nut driver insert 3/8" double hex 10.0 mm x 28 mm (33725)
- 1x Nut driver insert 3/8" double hex 11.0 mm x 28 mm (33726)
- 1x Nut driver insert 3/8" double hex 12.0 mm x 28 mm (33727)
- 1x Nut driver insert 3/8" double hex 13.0 mm x 28 mm (33728)
- 1x Nut driver insert 3/8" double hex 14.0 mm x 28 mm (44698)
- 1x Nut driver insert 3/8" double hex 15.0 mm x 28 mm (44699)
- 1x Nut driver insert 3/8" double hex 16.0 mm x 28 mm (33731)
- 1x Nut driver insert 3/8" double hex 17.0 mm x 28 mm (33732)
- 1x Nut driver insert 3/8" double hex 18.0 mm x 28 mm (44702)
- 1x Nut driver insert 3/8" double hex 19.0 mm x 28 mm (33734)
- 1x Nut driver insert 3/8" double hex 20.0 mm x 30 mm (44704)
- 1x Nut driver insert 3/8" double hex 21.0 mm x 30 mm (33736)
- 1x Nut driver insert 3/8" double hex 22.0 mm x 30 mm (44706)
- 1x Extension 3/8" for nut driver inserts 75 mm (33703)
- 1x Extension 3/8" for nut driver inserts 150 mm (44688)
- 1x Extension 3/8" for nut driver inserts 250 mm (33705)
- 1x Foam insert
show more
Price: EUR 83.98
851/1 IMP DC PH DIY Impaktor PH bits, PH 2 x 25 mm, 10 pieceBits, holder, keys, nuts
No. 05057616001. 851/1 IMP DC PH DIY Impaktor PH bits, PH 2 x 25 mm, 10 pieces 10x 851/1 IMP DC Impaktor bits: PH 2 x 25 mmHigh quality bits for Phillips screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers. ¼", hexagon, suitable for holders as per DIN ISO 1173-D 6.3.05057616001
show more
Price: EUR 37.26
Series 7400 Kraftform torque screwdrivers with a customisedTorque products
No. 05074790010. Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 89 mm, 7450 x 0.1-0.34 NmWera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074790010
show more
Price: EUR 83.95
Series 7400 Kraftform torque screwdrivers with a customisedTorque products
No. 05074792010. Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 89 mm, 7451 x 0.3-1.0 NmWera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074792010
show more
Price: EUR 83.95
Series 7400 Kraftform torque screwdrivers with a customisedTorque products
No. 05074794010. Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 89 mm, 7452 x 0.9-1.5 NmWera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074794010
show more
Price: EUR 83.95
Series 7400 Kraftform torque screwdrivers with a customisedTorque products
No. 05074715010. Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 105 mm, 7460 x 0.3-1.2 NmWera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074715010
show more
Price: EUR 83.95
Series 7400 Kraftform torque screwdrivers with a customisedTorque products
No. 05074716010. Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 105 mm, 7461 x 1.2-3.0 NmWera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074716010
show more
Price: EUR 83.95
Series 7400 Imperial Kraftform torque screwdrivers with a cuTorque products
No. 05074720010. Series 7400 Imperial Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 105 mm, 7465 x 2.5-11.5 in. lbs.Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074720010
show more
Price: EUR 83.95
Series 7400 Imperial Kraftform torque screwdrivers with a cuTorque products
No. 05074722010. Series 7400 Imperial Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 105 mm, 7466 x 11-29 in. lbs.Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074722010
show more
Price: EUR 83.95
6003 Joker Combination wrench, 30 x 330 mmWrenches
No. 05020505001. 6003 Joker Combination wrench, 30 x 330 mmAs installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder ",Take it easy",: colour coding by size.05020505001
show more
Price: EUR 40.74