Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
Elastic tips: dimensionally stable even when twisted. Distortion-tolerant, elastic precision tips. Half-round, long, tapered jaws. With cutting edges for soft, medium-hard and hard wire. Cutting edges additionally induction-hardened, cutting edge hardness approx. 61 HRC. straight jaws.
50 creped wipes, colour: turquoise, dimensions: 34x31cm
Applications:
- service and maintenance areas
- print shops
- automobile and aircraft industry
- electrical industry
- medical areas
- industry for room-care and housekeeping
Features:
- creped surface
- strong, dry as well as wet
- soft, flexible and comfortable in usage
- free-of lint and silicone
- cleans hard and polished surfaces without cords
- colourfast
- heat resistant til 230 degree Celsius
Part list
- Similar in technology to the TonerVac from 3M, but ca. 6 dB(A) less noisy(!), and consumes less energy
- 2 filter types: Type 1 is a HEPA filter for very fine toner, type 2 is for normal toner
- one filter type 2 included
- with overheat-protection
- ESD-safe
- 230V motor with 450 W
- ca. 49 x 23.5 x 19 cm (LxHxW), weight ca. 5 kg
Note: this vacuum cleaner is meant to clean toner pollution in printers and copiers. If big toner quantities must be cleaned, e.g. if cartridges are opened, other vacuum cleaners with atex-certification may be required. If in doubt, please refer to the toner material safety data sheet.
WEEE-Reg.-Nr. DE20337627.
Part list
- creeps in the finest angles, sliding-active
- do not resinify, is biologically completely degradable
- food-safe, skin-friendly and completely harmless
- for DIY, industry and crafts
- content: 200ml Spray
New version since May 2023! Matching tool pallets for this case (delivered empty) can be found in the 'case i nterior fittings' section in the left menu bar! The green pallet in the picture is not included in the order item.
Extremely stable aluminum frame, high-strength case shells made of X-ABS plastic. Three hinges connect the upper and lower parts. Two wide feet for a secure footing. Swivel for holding tool plates, which are held in position by a retaining strap in the lid. A suitable bottom shell with subdivisions and a closed cover with slots for various tools is already included in the scope of delivery. Including two keys.
External dimensions 48 x 35 x 18 cm, weight: approx. 3.7 kg.
Matching tool plates for this case (delivered empty) can be found in the 'case interior fittings' section in the left menu bar!