Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
Product dimensions: 85 x 10 x 10 mm (LxWxD)
Drive: DIN 3120, ISO 1174, style A 6.3 + A 10.
Drive: With 1/4" hex shank according to DIN 3126 C 6.3.
Application: Drilling, cutting threads and burring. For assembly work, repair and rethreading.
Application: Can be used in metal and plastic.
Bits: Reduced, over-tightened profile.
Extra: Three applications in a single work step. Particularly sutiable for use in battery-powered drivers.
Material: High-quality HSS steel, ground.
Packaging: Blister packed.
DIN 3126, ISO 1173, Style C6,3
Simplifies your work: Striking cap integrated into the handle allows you to strike and lift with the screwdriver.
Increases your efficiency: Unique Wiha handle-length concept for optimum balance of torque and control.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Increases your safety: Anti-slip handle simplifies work in oily and wet application areas.
Product dimensions: 213 x 36 x 36 mm (LxWxD)
Application: Best suited for turning screws in wet and oily applications.
Oily or damp work environments pose a risk that a screwdriver handle provides little support and users are unable to apply higher torques. The MicroFinish screwdriver eliminates such problems thanks to its micro-fine surface and guarantees optimum grip. The solid steel cap on the handle end allows direct hammering - to loosen screws which are stuck, for example. The impact energy is transmitted without any losses due to the direct connection between the solid steel cap and blade. The hexagon head on the blade enables higher torques to be transferred using a screw wrench. Wiha screwdrivers also stand out due to their sophisticated handle size concept. The long, slender handle sizes can be used to fasten small screws quickly and firmly. There are also large handle sizes to fasten large screws which can be used to apply greater torques. The various handle sizes have also been matched to the consistently same-sized hand of screw-fastening professionals.
Product dimensions: 120 x 36 x 36 mm (LxWxD)
Drive: For bits according to DIN 3126, ISO 1173 style C 6.3 and E 6.3.
Application: Together with Wiha countersink bits, can be used as manual deburrer.
Application: Compact screwdriver together with bits, 1/4".
Bit chuck: Stainless steel with strong magnet.
Bit holder: Stainless steel with strong magnet.
Handle: Wiha SoftFinish® multi-component handle with roll-off protection.
Standards: for bits DIN 3126, ISO 1173, form C6.3 and E6.3
Product dimensions: 130 x 50 x 40 mm (LxWxD)
Drive: DIN 3126, ISO 1173, style D 6.3.
Application: Eminently suitable for working in confined, hard-to-reach spaces.
Perfect for confined spaces
Compact and space-saving
Magnetic bit chuck
Convenient bit storage in the handle
The Stubby magazine bit holder contains bits in its handle. If you remove the cap on the end of the SoftFinish® multi-component handle, six 25 mm bits appear, designed for all standard screw fastenings. The magazine bit holder is thus flexible in its use and an attractive alternative to screwdriver sets, especially for portable use. The magnetic holding feature in the integrated bit holder ensures easy handling and an optimum grip. The practical, compact size sets the Stubby bit magazine apart as a specialized tool for working in highly confined spaces.
Content:
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 4.5 mm (01623)
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 6.5 mm (01626)
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 8.0 mm (01627)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH1 (01657)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH2 (01658)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH3 (01659)
Product dimensions: 130 x 50 x 40 mm (LxWxD)
Drive: DIN 3126, ISO 1173, style D 6.3.
Application: Eminently suitable for working in confined, hard-to-reach spaces.
Perfect for confined spaces
Compact and space-saving
Magnetic bit chuck
Convenient bit storage in the handle
The Stubby magazine bit holder contains bits in its handle. If you remove the cap on the end of the SoftFinish® multi-component handle, six 25 mm bits appear, designed for all standard screw fastenings. The magazine bit holder is thus flexible in its use and an attractive alternative to screwdriver sets, especially for portable use. The magnetic holding feature in the integrated bit holder ensures easy handling and an optimum grip. The practical, compact size sets the Stubby bit magazine apart as a specialized tool for working in highly confined spaces.
Content:
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH1 (01657)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH2 (01658)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH3 (01659)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ1 (01688)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ2 (01689)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ3 (01690)
Wiha
Meets your requirements: White hammer head / very hard: e.g. for building and construction, mould construction, road construction, gardening and landscaping.
Product dimensions: 61 x 61 x 39 mm (LxWxD)
GS tested.
Product dimensions: 131 x 47 x 30 mm (LxWxD)
Application: For work in the area of live parts up to 1,000 V AC.
Standards: DIN ISO 8764-PZ.
Fastening screws by hand causes considerable strain on wrists and muscles in the long term. The highly ergonomically shaped SoftFinish® screwdriver provides a remedy, ensuring optimal transmission of hand force. The long, slender handle sizes can be used to fasten small screws quickly and firmly. There are also large handle sizes to fasten large screws which can be used to apply greater torques. The various handle sizes have also been matched to the consistently same-sized hand of screw-fastening professionals. The roll-off protection and screw symbol printed on the handle end ensure users work efficiently. Protective insulation has been integrated into the blade with the Wiha slimTECHNOLOGY specially developed for electric applications, thus ensuring blades which are up to 33% slimmer. This means low-lying screw and spring elements can also be easily reached. These insulated screwdrivers undergo routine individual piece testing as per the international IEC 60900 standard, as a result * providing users with a tool to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Simplifies your work: Equipped with just one TORX® profile for all types of use.
Increases your efficiency: Unique Wiha handle-length concept for optimum balance of torque and control.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slim blades ensure unlimited, protected access to deep-set screws.
Product dimensions: 211 x 30 x 30 mm (LxWxD)
Application: For work in the area of live parts up to 1,000 V AC.
Ergonomic working - Recommended by doctors and therapists of the German Campaign for Healthier Backs
Wiha handle size concept - powerful and sensitive fastening
slimBits allow access to low-lying screws thanks to inserted insulation
Safe operation up to 1,000 V AC
Fastening screws by hand causes considerable strain on wrists and muscles in the long term. The highly ergonomically shaped SoftFinish® screwdriver provides a remedy, ensuring optimal transmission of hand force. The different handle heights are always matched to the fastening. The long, slender handle heights can be used to fasten small screws quickly and firmly. There are also large-volume handle heights to fasten large screws which can be used to apply greater torques. The roll-off protection and screw symbol printed on the handle end ensure users work efficiently. With the Wiha slimTECHNOLOGY specially developed for electric applications, the protective insulation has been integrated into the blade, thus allowing blades which are up to 33% slimmer. This means low-lying screw and spring elements can easily be reached. These insulated screwdrivers undergo routine individual piece testing as per the international IEC 60900 standard, thus providing users with a tool to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Increases your efficiency: The all-rounder with 120x greater lifespan* thanks to patented bit technology, suitable for all screws. (*compared to Wiha standard bit)
Lowers your costs: Bit quick and easy to find thanks to red marking - even in dark environments by using an UV light.
Saves time: No long searches thanks to fluorescent bit, infrequent bit replacement thanks to long lifespan.
Product dimensions: 110 x 50 x 25 mm (LxWxD)
Application: Suitable for all types of screws. Also suitable for power tools and impact screwdrivers
Standards: DIN ISO 2351-3
Until now, when buying bits it hasn't been very easy to determine which bits are suitable for which applications. Wiha puts an end to this complexity of considering the appliance used, the fastening type and the large selection of different bits. Thanks to Wiha's revolutionary bit concept, only the screw shape is the deciding factor when selecting the right bit. Universal in its use, the multitalented TY bit is suitable for all types of screws - both T-shaped and Y-shaped screws - and thus the ideal tool for fastenings in all kinds of materials. Thanks to its patented torsion zone, the bit is also suitable for power tools and impact screwdrivers and guarantees a 120x greater lifespan compared to Wiha standard bits. The coloured bits are also quick and easy to find, even in the dark by using an UV light, thanks to its fluorescent coating. This reduces the number of bits which are lost and saves on the expense of acquiring new ones.
DIN 3126, ISO 1173, Style C6,3
Increases your efficiency: The all-rounder with 120x greater lifespan* thanks to patented bit technology, suitable for all screws. (*compared to Wiha standard bit)
Lowers your costs: Bit quick and easy to find thanks to red marking - even in dark environments by using an UV light.
Saves time: No long searches thanks to fluorescent bit, infrequent bit replacement thanks to long lifespan.
Product dimensions: 110 x 50 x 25 mm (LxWxD)
Application: Suitable for all types of screws. Also suitable for power tools and impact screwdrivers
Standards: DIN ISO 2351-3
Until now, when buying bits it hasn't been very easy to determine which bits are suitable for which applications. Wiha puts an end to this complexity of considering the appliance used, the fastening type and the large selection of different bits. Thanks to Wiha's revolutionary bit concept, only the screw shape is the deciding factor when selecting the right bit. Universal in its use, the multitalented TY bit is suitable for all types of screws - both T-shaped and Y-shaped screws - and thus the ideal tool for fastenings in all kinds of materials. Thanks to its patented torsion zone, the bit is also suitable for power tools and impact screwdrivers and guarantees a 120x greater lifespan compared to Wiha standard bits. The coloured bits are also quick and easy to find, even in the dark by using an UV light, thanks to its fluorescent coating. This reduces the number of bits which are lost and saves on the expense of acquiring new ones.
DIN 3126, ISO 1173, Style C6,3