Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
Wiha
Meets your requirements: White hammer head / very hard: e.g. for building and construction, mould construction, road construction, gardening and landscaping.
Product dimensions: 69 x 69 x 58 mm (LxWxD)
Application: Building and construction industries, foundry, mould making, road work, forestry and agriculture, gardening and landscaping.
Meets your requirements: Blue hammer head / soft: e.g. for furniture work and interior decorating, minor assembly. Black hammer head / medium soft: e.g. for paving, tiling, dry wall construction.
Simplifies your work: Makes work easier, optimum impact effect and less effort needed.
Lowers your costs: Ergonomic hickory wooden handle and hammer head both available as spare parts.
Product dimensions: 290 x 87 x 34 mm (LxWxD)
GS tested.
Increases your efficiency: Braiding and cutting of binding wire in one work step.
Lowers your costs: Reduced wear due to induction hardened cutting-edge.
Product dimensions: 305 x 52 x 26 mm (LxWxD)
Application: For binding (plaiting) and cutting wire netting in reinforced concrete structures in a single operation.
DIN ISO 9242.
Meets your requirements: Permanently stable through box joint with double guidance.
Product dimensions: 250 x 100 x 22 mm (LxWxD)
Application: For gripping and holding pipes and angular profiles as well as hexagon nuts in installations.
Turning, pulling, gripping and holding of e.g. pipes or tightening screws and nuts
9-level gradation - fast and flexible adjustment of the gripping width
Secure hold on the workpiece thanks to self-clamping
Highest stability thanks to a box type joint
Installation projects often involve pipes, nuts, as well as rounded and edged materials in a variety of dimensions. Water pump pliers offer the optimal grip for all occasions. With a 9-step detent adjustment it offers maximum variability when working in the installation area. Crushing injuries are prevented thanks to the integrated clamping protection. Double guidance based on a box joint ensures the greatest stability of the pliers. At the same time, the slim design in the head and joint area provides reliable access to the work piece, even in confined areas. The handles of the pliers are made of anti-slip plastic and offer users a strong grip, even in oily or wet work situations. In addition, slipping off the work piece is prevented by the self-clamping on pipes and nuts, thus enabling highly comfortable work. When in use, the high-quality specially hardened teeth guarantee a reliable secure grip with long-term durability. The robust water pump pliers are dirt resistant.
DIN ISO 8976.
Product dimensions: 138 x 100 x 20 mm (LxWxD)
Application: For absolutely flush cutting of soft wires in difficult-to-access spots in electronic engineering.
Material: C 70 special tool steel.
Precise and clean cutting
Perfectly suited for electronic applications
Precise cuts for small and delicate cutting tasks of electronics and precision mechanics
Smooth-running work with opening spring
Perfect for confined spaces
When working on electronic components, the professional tradesman needs a high level of concentration due to the particularly small parts. To render the work as convenient as possible, Wiha offers the diagonal cutters electronic, the precision pliers for the most delicate electronic engineering cutting tasks. Thanks to the cutting edge without exterior bevel, a smooth cutting edge on soft wires is achieved even in difficult to access locations. The durable C 70 special tool steel promises high quality cutting processes for discerning users. In addition, the inductively hardened and precisely honed cutting edges guarantee high cutting performance. The ergonomically shaped plier handle ensures comfortable, fatigue-proof work, even with continuous use. A tradesman's tool kit would be incomplete without versatile diagonal cutters for flush cutting hard and soft wires.
DIN ISO 9654.
Product dimensions: 180 x 100 x 28 mm (LxWxD)
Application: For an absolutely flush cut of soft wires in the electronics industry.
Head shape: Wide, pointed head.
Material: C 70 special tool steel.
Delicate cutting of soft wires in the electronics sector
Absolutely flush cutting without exterior bevel
Kind to hands and muscles
DIN ISO 9654.
Simplifies your work: Striking cap integrated into the handle allows you to strike and lift with the screwdriver.
Increases your efficiency: Unique Wiha handle-length concept for optimum balance of torque and control.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Increases your safety: Anti-slip handle simplifies work in oily and wet application areas.
Product dimensions: 271 x 41 x 41 mm (LxWxD)
Application: Best suited for turning screws in wet and oily applications.
Oily or damp work environments pose a risk that a screwdriver handle provides little support and users are unable to apply higher torques. The MicroFinish screwdriver eliminates such problems thanks to its micro-fine surface and guarantees optimum grip. The solid steel cap on the handle end allows direct hammering - to loosen screws which are stuck, for example. The impact energy is transmitted without any losses due to the direct connection between the solid steel cap and blade. The hexagon head on the blade enables higher torques to be transferred using a screw wrench. Wiha screwdrivers also stand out due to their sophisticated handle size concept. The long, slender handle sizes can be used to fasten small screws quickly and firmly. There are also large handle sizes to fasten large screws which can be used to apply greater torques. The various handle sizes have also been matched to the consistently same-sized hand of screw-fastening professionals.
Product dimensions: 210 x 60 x 28 mm (LxWxD)
Application: General purpose pliers for gripping and holding as well as cutting soft and hard wires and cables.
2in1: Cutting and gripping
DynamicJoint® - Innovative unique joint design
No twisting or slipping
Kind to hands and muscles
A variety of pliers are essential for professional industrial jobs. The combination pliers with DynamicJoint® and OptiGrip made by Wiha combine the functions of several pliers and thus minimize the number of required tools. The pliers are used for gripping as well as cutting of soft and hard wires and cables. Thanks to the gripping zone for round and flat material, the combination pliers can be used for many tasks, and its extra long cutting edge makes it additionally suitable for flat and round cables. What is more, the innovative pliers joint with DynamicJoint® ensures that the hand force is optimally transferred to cutting surfaces, providing up to 20% greater cutting force. Another advantage is offered by our Optigrip - the newly designed gripping surface with "triple-point support" ensures optimal hold of the workpiece while working and eliminates any twisting or slipping. The ergonomically shaped plier handle ensures comfortable, fatigue-proof work. The cutting edges that are inductively hardened to approx. 64 HRC and the high-quality C 70 tool steel contribute to a long tool life.
To benefit from this product for as long as possible, we recommend regularly applying a drop of oil after use.
DIN ISO 5746.
Product dimensions: 170 x 60 x 26 mm (LxWxD)
Application: Gripping and holding as well as cutting soft and hard wires and cables. Preferred choice in the mechanical sector.
Dimensionally stable pliers for twists when cutting soft and hard wire
Long tool life thanks to high-quality material use
Optimal access thanks to pointed converging jaws
DIN ISO 5745.
Product dimensions: 198 x 94 x 15 mm (LxWxD)
Application: Minimum switching angle of only 5° enables use of bit ratchet even in the tightest spaces.
Application: Due to outstandingly smooth running the mechanism functions even when other ratchets fail, e.g. with furniture assembly.
Application: Especially handy bit ratchet for a wide variety of fastening applications.
Design: Drop forged, especially robust version.
Design: Finely serrated ratchet mechanism with 72 teeth.
Design: with practical thumb wheel.
Design: Maximum ergonomics due to user-specific SoftFinish form.
Design: Clockwise and anticlockwise direction can be switched via switching lever.
Bit chuck: For bits according to DIN 3126, ISO1173, style C 6.3 and E 6.3.
Extra: Thumb-wheel aids applying, fastening and releasing screws.
Material: High-quality chrome-molybdenum steel, chrome-plated and satin finished.
Standards: for bits DIN 3126, ISO 1173, form C6.3 and E6.3