Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
- mit Einstellschraube und Schnelllösehebel
- geschmiedete, vergütete Backen
- Spezialmaul zum sicheren Greifen, Spannen und Halten
- Chrom-Vanadium-Stahl
- vernickelt
- Backenkörper Stahlblech mit hoher Festigkeit
- durchdachte Backenform garantiert Dreipunkt
- Auflage bei jedem Materialquerschnitt
- Gesamtlänge: 185mm
Simplifies your work: Striking cap integrated into the handle allows you to strike and lift with the screwdriver.
Increases your efficiency: Screwdriver handle size concept for optimal balance between precision and control.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Makes handling easier: Easy loosening of tight screws thanks to hex bolster for spanners.
Product dimensions: 271 x 41 x 41 mm (LxWxD)
Application: Particularly suitable for dry applications.
Supplementary information: * Additional dimension. Non-DIN size.
Ergonomic working - Recommended by doctors and therapists of the German Campaign for Healthier Backs
Wiha handle size concept - powerful and sensitive fastening
Integrated striking cap allows users to strike and chisel with the screwdriver
Easy loosening of tight screws thanks to hex bolster for spanners
Saves space: Compact and space-saving solution.
Simplifies your work: The ball end facilitates access to screws and allows you to work at an angle of up to 25°.
Product dimensions: 282 x 110 x 50 mm (LxWxD)
Application: Suitable for fastening and loosening hex screws in difficult-to-access spots.
Well organized storage
Perfect for confined spaces thanks to ball end
Keeping many different L-keys safe and organized to prevent loss can be awkward and annoying. The Classic holder from Wiha has changed all that. The holder provides an optimum overview of all L-key sizes and makes it easy to return the L-key safely, thanks to a fixed stop point. A clamping in the holder makes sure that the keys cannot fall out. The set contains 9 black-oxidized hex L-keys in standard sizes. The L-key set can be hung up directly at the workplace using the suspension bracket on the holder.
Based on ISO 2936L.
Content:
- 1x L-keys 1.5 mm x 91 mm (05638)
- 1x L-keys 2.0 mm x 101 mm (03868)
- 1x L-keys 2.5 mm x 113 mm (03869)
- 1x L-keys 3.0 mm x 128 mm (03870)
- 1x L-keys 4.0 mm x 142 mm (03871)
- 1x L-keys 5.0 mm x 163 mm (03872)
- 1x L-keys 6.0 mm x 184 mm (03873)
- 1x L-keys 8.0 mm x 206 mm (03874)
- 1x L-keys 10.0 mm x 231 mm (03875)
- 1x Classic holder
Meets your requirements: Black hammer head / medium soft: e.g. for paving, tiling, dry wall construction.
Simplifies your work: Makes work easier, optimum impact effect and less effort needed.
Lowers your costs: Ergonomic hickory wooden handle and hammer head both available as spare parts.
Product dimensions: 290 x 87 x 34 mm (LxWxD)
GS tested.
Meets your requirements: Black hammer head / medium soft: e.g. for paving, tiling, dry wall construction. White hammer head / very hard: e.g. for building and construction, mould construction, road construction, gardening and landscaping.
Simplifies your work: Makes work easier, optimum impact effect and less effort needed.
Lowers your costs: Ergonomic hickory wooden handle and hammer head both available as spare parts.
Product dimensions: 290 x 87 x 34 mm (LxWxD)
GS tested.
Product dimensions: 145 x 75 x 17 mm (LxWxD)
Application: For holding small components as well as for holding and angling wires.
Design: With plain inside jaws.
Design: Width at tip is only 1.2 mm.
Head shape: Narrow, short head.
Material: C 70 special tool steel.
Product dimensions: 270 x 100 x 43 mm (LxWxD)
Application: Also appropriate for binding (plaiting) and cutting wire netting in reinforced concrete structures.
Application: Power assisted, all round diagonal cutter for soft wires as well as demanding piano wires.
DIN ISO 5748.
Meets your requirements: Permanently stable through box joint with double guidance.
Product dimensions: 100 x 100 x 27 mm (LxWxD)
Application: For gripping and holding pipes and angular profiles as well as hexagon nuts in installations.
Turning, pulling, gripping and holding of e.g. pipes or tightening screws and nuts
9-level gradation - fast and flexible adjustment of the gripping width
Secure hold on the workpiece thanks to self-clamping
Highest stability thanks to a box type joint
Installation projects often involve pipes, nuts, as well as rounded and edged materials in a variety of dimensions. Water pump pliers offer the optimal grip for all occasions. With a 9-step detent adjustment it offers maximum variability when working in the installation area. Crushing injuries are prevented thanks to the integrated clamping protection. Double guidance based on a box joint ensures the greatest stability of the pliers. At the same time, the slim design in the head and joint area provides reliable access to the work piece, even in confined areas. The handles of the pliers are made of anti-slip plastic and offer users a strong grip, even in oily or wet work situations. In addition, slipping off the work piece is prevented by the self-clamping on pipes and nuts, thus enabling highly comfortable work. When in use, the high-quality specially hardened teeth guarantee a reliable secure grip with long-term durability. The robust water pump pliers are dirt resistant.
DIN ISO 8976.