Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
Product dimensions: 248 x 114 x 27 mm (LxWxD)
ISO 2936K.
Simplifies your work: The variable handle position guarantees power fastenings as well as fast fastenings.
Increases your efficiency: The most common drives cleverly organized in one tool.
Saves time: Thanks to its simple operation, the desired drive can be used quickly.
Product dimensions: 120 x 41 x 33 mm (LxWxD)
Application: Suitable for portable use and workshop tasks. The folding holder allows hex screws to be lifted out of or inserted into holes even in hard-to-reach places.
The most common drives
Can be used as a horizontal or longitudinal handle
Versatile use
No more trapped fingers. The PocketStar® L-key set impresses with its optimum handling and great utility, which is expressed in a multitude of practical features. The seven L-keys are stored in a handy, fiberglass-reinforced folding holder. A clever opening button allows to easily select the required key size. You can freely choose from many different work positions between 90° and 270°, depending on the screw fastening task at hand. In the 180° position, the tool is transformed into a screwdriver, for example. When the key is positioned on the 270° stop, the folding holder becomes a tool with a practical lever arm for high torques. It is also a clever solution for situations where users require just one single key to move in the work position since PocketStar stops the other keys from swinging back and getting in the way.
Simplifies your work: The variable handle position guarantees power fastenings as well as fast fastenings.
Increases your efficiency: The most common drives cleverly organized in one tool.
Saves time: Thanks to its simple operation, the desired drive can be used quickly.
Product dimensions: 120 x 41 x 33 mm (LxWxD)
Application: Suitable for portable use and workshop tasks. The folding holder allows hex screws to be lifted out of or inserted into holes even in hard-to-reach places.
The most common drives
Can be used as a horizontal or longitudinal handle
Versatile use
No more trapped fingers. The PocketStar® L-key set impresses with its optimum handling and great utility, which is expressed in a multitude of practical features. The seven L-keys are stored in a handy, fiberglass-reinforced folding holder. A clever opening button allows to easily select the required key size. You can freely choose from many different work positions between 90° and 270°, depending on the screw fastening task at hand. In the 180° position, the tool is transformed into a screwdriver, for example. When the key is positioned on the 270° stop, the folding holder becomes a tool with a practical lever arm for high torques. It is also a clever solution for situations where users require just one single key to move in the work position since PocketStar stops the other keys from swinging back and getting in the way.
Increases your efficiency: Extra-long plier head for inserting low-lying components.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Lowers your costs: Durable thanks to high-quality, chrome-plated plier surface to prevent corrosion.
Product dimensions: 177 x 100 x 30 mm (LxWxD)
Application: For all fitting, gripping and adjustment tasks, as well as cutting to length of live parts up to 1,000 V AC.
Standards: Manufactured acc. to IEC 60900.
Cutting, bending, gripping - also in difficult-to-access spots
Kind to hands and muscles
Safe operation up to 1,000 V AC
Often, thick wires must be securely held and shaped at the same time, which requires a high bending force. The needle nose pliers from Wiha are the solution for all fitting, gripping and adjustment tasks. The toothed gripping surface ensures that all components, wires or cables can be easily and comfortably held in place. In addition, the long, pointed and flat rounded jaws allow the secure insertion of low-lying components. What's more, the cutting edges located behind them allow cutting soft, medium-hard and hard wires to length. The ergonomically shaped plier handle ensures comfortable, fatigue-proof work. The cutting edges that are inductively hardened to approx. 64 HRC and the high-quality C 70 tool steel contribute to a long tool life. The insulated needle nose pliers are subject to routine testing as per the international IEC 60900 standard, thus ensuring safe work on live parts up to 1,000 V AC.
DIN ISO 5745.
Simplifies your work: More power when fastening thanks to the leverage from the T-handle design
Increases your efficiency: Handle size concept for an optimum balance between torque and control
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Product dimensions: 263 x 100 x 20 mm (LxWxD)
Application: For external hex screws and hex nuts.
Manufactured acc. to IEC 60900.
Product dimensions: 150 x 54 x 12 mm (LxWxD)
Application: For crimping end sleeves acc. to DIN 46228 parts 1 + 4.
Design: Sleeve and conductor inserted from the side.
Design: Trapezoidal or semi-circular profiles for a secure connection between end sleeve and conductor.
Head shape: Fixed profile grooves for the relevant conductor cross-sections.
Material: High-quality tool steel, tempered.
DIN ISO 5743.
Product dimensions: 210 x 60 x 27 mm (LxWxD)
Application: Gripping and holding as well as cutting soft and hard wires and cables. Preferred choice in the mechanical sector.
DIN ISO 5745.
Meets your requirements: Permanently stable through box joint with double guidance.
Product dimensions: 260 x 70 x 28 mm (LxWxD)
Application: For gripping and holding pipes and angular profiles as well as hexagon nuts in installations.
Material: High quality chrome vanadium molybdenum steel, tempered.
Installation projects often involve pipes, nuts, as well as rounded and edged materials in a variety of dimensions. Water pump pliers offer the optimal grip for all occasions. With a 9-step detent adjustment it offers maximum variability when working in the installation area. Crushing injuries are prevented thanks to the integrated clamping protection. Double guidance based on a box joint ensures the greatest stability of the pliers. At the same time, the slim design in the head and joint area provides reliable access to the work piece, even in confined areas. The handles of the pliers are made of anti-slip plastic and offer users a strong grip, even in oily or wet work situations. What is more, the ergonomically shaped pliers handle ensures comfortable, fatigue-proof work. In addition, slipping off the work piece is prevented by the self-clamping on pipes and nuts, thus enabling highly comfortable work. When in use, the high-quality specially hardened teeth guarantee a reliable secure grip with long-term durability. The robust water pump pliers are dirt resistant.
DIN ISO 8976.
Increases your efficiency: All keys and profiles integrated into one compact, lightweight tool.
Product dimensions: 207 x 100 x 34 mm (LxWxD)
Application: For opening switch cabinets, inspection openings on street lamps, chimneys, venting heating systems, etc.
9 key profiles in one tool
Push-on clip for attachment to the belt or directly to work trousers
Suited for different applications in the area of maintenance and service
In switch cabinets and locking systems different key profiles are used that are not covered by standard screwdrivers or bit sets. Collecting all required profiles individually requires much time. For efficient operation, the switch cabinet key from Wiha comprises 9 essential key profiles, including two double bits with slotted, Phillips and Torx profiles. Thanks to the high-tech GRIVORY® material, the Wiha switch cabinet key reduces weight by up to 30%.
Product dimensions: 190 x 110 x 50 mm (LxWxD)
DIN 3126, ISO 1173, Style C6,3
Content:
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 5.5 mm (01624)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH2 (01658)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ1 (01688)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ2 (01689)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ3 (01690)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T15 (01717)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T20 (01718)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T25 (01719)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T30 (01721)
- 1x Bit Standard 25 mm Hexagon 1/4" C6,3 3.0 mm (01705)
- 1x Bit Standard 25 mm Hexagon 1/4" C6,3 4.0 mm (01706)
- 1x Bit Standard 25 mm Hexagon 1/4" C6,3 5.0 mm (01707)
- 1x Bit holder magnetic 58 mm 1/4" (01895)
- 1x FlipSelector
- 1x Belt clip