• for cutting thick walled plastic and composite pipes up to Ø 40 mm
• cuts pipes using the ratchet principle in several strokes
• self-adapting pipe support positions pipes of vario us diameters correctly for a rectangular cut

• Fully open, push, grab!
• additional fast adjustment on the workpiece by sliding the p liers handle
• combines the proven, reliable locking of the hinge bolt with an additional push function which makes it easier to work in very confined and inaccessible areas
• the adjustme nt directly on the workpiece is possible by simply sliding the pliers handle
• reliable lockin g of the hinge bolt with the first workload. The gripping width of the pliers is then fixed and can only be adjusted by pressing the button.
• to re-activate the sliding function, the hinge bolt must be released by pressing the push button and the pliers must be completely opened again
• self-locking on pipes and nuts: no slipping on the workpiece and low handforce required
• gri pping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: high wear resistance and stable gripping
• box-joint design for high stability due to double guide
• Pinch guard prevents operators' fingers being pinched

• self-locking on pipes and nuts: no slipping on the workpiece and low handforce required
• gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: high wear resistan ce and stable gripping
• box-joint design for high stability due to double guide
• robus t construction, insensitive to dirt
• particularly suitable for outdoor work
• Pinch gu ard prevents operators' fingers being pinched
• pliers with tether attachment point for mounti ng a fall protection system
• with slim multi-component grips without collar for better handli ng and easier transport

• easy cutting thanks to the high leverage joint
• For all common installation and repai r work.
• handy use when working in confined areas thanks to slim head design and pointed jaws (anti-twist)
• milled groove in the gripping area permits small parts such as nails, pins and bolts to be held and pulled
• the reliable and diverse combination pliers when out and about< /li>
• with cutting edges for soft, medium-hard and hard wire
• long service life and stable tips
• cutting edges additionally induction-hardened, cutting edge hardness approx. 61 HRC

• For secure handling of electronic workparts: equalize differences in electrical potential be tween their user and the workpieces in a controlled manner
• Maximum comfort for frequent use< /li>
• Handles suitable for use in clean rooms and controlled environments
• For medical tech nology, electronics, microscopy, industry
• For particularly demanding precision work: tough a nd highly resistant to corrosion
• Antimagnetic to avoid electromagnetic damage
• ESD-te sted, soft, and ergonomic handle sleeves with a surface resistance between 10^3 and 10^9 ohms
Premium stainless steel core: Extremely tough and very good corrosion resistance against a variety of atmospheric environments and many corrosive materials

Sicherer Halt der Bits dank mechanisch verriegelbarem Bithalter 1/4" mit Magnet

Mit 30 Bits und Bithalter

DIN 3126, ISO 1173, Style C6,3

Content:

• 1x Bit Standard 25 mm Slotted 1/4" C6,3 4.5 mm (01623)
• 1x Bit Standard 25 mm Slotted 1/4" C6,3 5.5 mm (01624)
• 1x Bit Standard 25 mm Slotted 1/4" C6,3 6.5 mm (01626)
• 2x Bit Standard 25 mm Phillips 1/4" C6,3 PH1 (01657)
• 6x Bit Standard 25 mm Phillips 1/4" C6,3 PH2 (01658)
• 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH3 (01659)
• 2x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ1 (01688)
• 6x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ2 (01689)
• 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ3 (01690)
• 1x Bit Standard 25 mm TORX® 1/4" C6,3 T10 (01716)
• 1x Bit Standard 25 mm TORX® 1/4" C6,3 T15 (01717)
• 1x Bit Standard 25 mm TORX® 1/4" C6,3 T20 (01718)
• 1x Bit Standard 25 mm TORX® 1/4" C6,3 T25 (01719)
• 1x Bit Standard 25 mm TORX® 1/4" C6,3 T30 (01721)
• 1x Bit Standard 25 mm TORX® 1/4" C6,3 T40 (01722)
• 1x Bit Standard 25 mm Hexagon 1/4" C6,3 4.0 mm (01706)
• 1x Bit Standard 25 mm Hexagon 1/4" C6,3 5.0 mm (01707)
• 1x Bit Standard 25 mm Hexagon 1/4" C6,3 6.0 mm (01708)
• 1x Bit holder magnetic 58 mm 1/4" (01895)
• 1x Bit box

Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

Application: For work in the area of live parts up to 1,000 V AC.

Application: Power assisted general purpose pliers for gripping and holding as well as cutting wires and cables ranging in hardness from soft to extremely hard.

Standards: DIN ISO 5746.

Manufactured acc. to IEC 60900.