Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
Simplifies your work: The variable handle position guarantees power fastenings as well as fast fastenings.
Increases your efficiency: The most common drives cleverly organized in one tool.
Saves time: Thanks to its simple operation, the desired drive can be used quickly.
Product dimensions: 120 x 41 x 33 mm (LxWxD)
Application: Insert screws into or remove from boreholes, especially in difficult to access areas.
Application: Practical fold out holder for hex screws in the workplace or on the job.
Application: Chrome-vanadium steel, through hardened, electro-plated.
Extra: MagicRing® of spring steel (from size 3 mm) secures all hex standard screws independently of screw material in any position.
Extra: The ball end enables the user to work at angles up to 25°.
Extra: Robust casing with eject button for simple and easy key selection.
Handle: Ergonomic, reinforced fibreglass housing, 120 mm long.
Blade: Chrome-vanadium steel, through hardened, electro-plated.
Product dimensions: 120 x 41 x 33 mm (LxWxD)
Application: Insert screws into or remove from boreholes, especially in difficult to access areas.
Application: Practical fold out holder for hex screws in the workplace or on the job.
Application: Chrome-vanadium steel, through hardened, electro-plated.
Extra: MagicRing® of spring steel (from size 3 mm) secures all hex standard screws independently of screw material in any position.
Extra: The ball end enables the user to work at angles up to 25°.
Extra: Robust casing with eject button for simple and easy key selection.
Handle: Ergonomic, reinforced fibreglass housing, 120 mm long.
Blade: Chrome-vanadium steel, through hardened, electro-plated.
Simplifies your work: The variable handle position guarantees power fastenings as well as fast fastenings.
Increases your efficiency: The most common drives cleverly organized in one tool.
Saves time: Thanks to its simple operation, the desired drive can be used quickly.
Product dimensions: 120 x 41 x 33 mm (LxWxD)
Application: Practical fold out holder for TORX® Tamper Resistant (with security pin) screws in the workplace or on the job.
Extra: Robust casing with eject button for simple and easy key selection.
Extra: Borehole in every blade tip.
Handle: Ergonomic, reinforced fibreglass housing, 120 mm long.
Blade: Chrome-vanadium steel, through hardened, electro-plated.
Product dimensions: 120 x 41 x 33 mm (LxWxD)
Application: Practical fold out holder for TORX® Tamper Resistant (with security pin) screws in the workplace or on the job.
Extra: Robust casing with eject button for simple and easy key selection.
Extra: Borehole in every blade tip.
Handle: Ergonomic, reinforced fibreglass housing, 120 mm long.
Blade: Chrome-vanadium steel, through hardened, electro-plated.
Meets your requirements: Permanently stable through box joint with double guidance.
Product dimensions: 305 x 65 x 18 mm (LxWxD)
Application: For gripping and holding pipes and angular profiles as well as hexagon nuts in installations.
Turning, pulling, gripping and holding of e.g. pipes or tightening screws and nuts
9-level gradation - fast and flexible adjustment of the gripping width
Secure hold on the workpiece thanks to self-clamping
Highest stability thanks to a box type joint
Installation projects often involve pipes, nuts, as well as rounded and edged materials in a variety of dimensions. Water pump pliers offer the optimal grip for all occasions. With a 9-step detent adjustment it offers maximum variability when working in the installation area. Crushing injuries are prevented thanks to the integrated clamping protection. Double guidance based on a box joint ensures the greatest stability of the pliers. At the same time, the slim design in the head and joint area provides reliable access to the work piece, even in confined areas. The handles of the pliers are made of anti-slip plastic and offer users a strong grip, even in oily or wet work situations. In addition, slipping off the work piece is prevented by the self-clamping on pipes and nuts, thus enabling highly comfortable work. When in use, the high-quality specially hardened teeth guarantee a reliable secure grip with long-term durability. The robust water pump pliers are dirt resistant.
DIN ISO 8976.
Simplifies your work: More power when fastening thanks to the leverage from the T-handle design
Increases your efficiency: Handle size concept for an optimum balance between torque and control
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Product dimensions: 267 x 118 x 27 mm (LxWxD)
Application: For external hex screws and hex nuts.
Manufactured acc. to IEC 60900.
Meets your requirements: Permanently stable through box joint with double guidance.
Increases your efficiency: Fast and simple adjustment of pliers with push button.
Product dimensions: 320 x 300 x 32 mm (LxWxD)
Application: For gripping and holding pipes and angular profiles as well as hexagon nuts in installations.
Material: High quality chrome vanadium molybdenum steel, tempered.
Turning, pulling, gripping and holding of e.g. pipes or tightening screws and nuts
9-level gradation - flexible adjustment of the gripping width at the push of a button
Secure hold on the workpiece thanks to self-clamping
Highest stability thanks to a box type joint
Kind to hands and muscles
Installation projects often involve pipes, nuts, as well as rounded and edged materials in a variety of dimensions. Water pump pliers offer an optimum grip for all occasions. With a 9-step detent adjustment, it offers maximum variability for work in the installation area, where it can be quickly and easily adjusted and locked at the push of a button. Crushing injuries are prevented thanks to the integrated clamping protection. The pliers are equipped with a box-type joint, which ensures maximum stability due to the double guidance. At the same time, the slim design in the head and joint areas provides easy access to the workpiece, even in confined work areas. The handles of the pliers are made of anti-slip plastic and offer users a strong grip, even in oily or wet work situations. What's more, the ergonomically shaped pliers handle ensures comfortable, fatigue-proof work. In addition, slipping off the work piece is prevented by self-clamping on pipes and nuts, thus enabling highly comfortable work. When in use, the high-quality specially hardened teeth guarantee a reliable, secure grip with long-term durability. The high-quality chrome vanadium molybdenum steel guarantees robustness and a long service life. The robust water pump pliers are dirt-resistant.
To benefit from this product for as long as possible, we recommend regularly applying a drop of oil after use.
DIN ISO 8976.
Product dimensions: 270 x 100 x 39 mm (LxWxD)
Application: Gripping and holding as well as cutting soft and hard wires and cables. Preferred choice in the mechanical sector.
DIN ISO 5745.
Simplifies your work: Larger handle - maximum power.
Increases your efficiency: 90% less volume, 80% less weight - 100% efficiency.
Increases your flexibility: Standard bits are also suitable for machine operation.
Protects your health: No risk of injury, *all bits stowed safely inside the handle.
Product dimensions: 210 x 39 x 39 mm (LxWxD)
Application: The alternative to a set of screwdrivers. Ideal for screw fastening when out on jobs.
Large handle - maximum power
Clearly arranged and easy to remove
Magnetic bit chuck
12 drives in one tool
25 mm standard bits for manual and machine operation
It's not uncommon for tradesmen out on jobs to need a screwdriver with a specific profile but not have the precise one within reach when they need it. The Wiha screwdriver with the LiftUp 25 bit magazine puts an end to such problems, because with only one tool you have 12 different drives at hand anytime, anywhere. LiftUp thus replaces an entire screwdriver set. At the press of a button, the bit magazine at the handle end comes out, delivering the 25 mm bits with a 1/4" drive ready for removal. The contained standard bits can be used for both manual and machine operation. Thanks to its large volume, the ergonomically shaped two-component handle ensures optimum power transmission and maximum torque values. Powerful screw fastening or loosening is therefore particularly easy for the hand.
Content:
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 4.5 mm (01623)
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 6.5 mm (01626)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH1 (01657)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH2 (01658)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH3 (01659)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ1 (01688)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ2 (01689)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ3 (01690)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T15 (01717)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T20 (01718)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T25 (01719)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T30 (01721)