Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
Simplifies your work: Up to 40% more cutting force thanks to optimised leverage.
Increases your efficiency: A secure, non-slip grip in all standard work situations.
Protects your health: Special DynamicJoint® design reduces effort required for cutting.
Lowers your costs: Durable thanks to high-quality, chrome-plated plier surface to prevent corrosion.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Product dimensions: 230 x 62 x 31 mm (LxWxD)
Application: For work in the area of live parts up to 1,000 V AC.
Application: Power assisted general purpose pliers for gripping and holding as well as cutting wires and cables ranging in hardness from soft to extremely hard.
Standards: DIN ISO 5746.
Manufactured acc. to IEC 60900.
Simplifies your work: Ideal for fine gripping and bending work in electronics.
Protects your health: Reduces strain from continuous work thanks to opening spring.
Lowers your costs: Electrostatically conductive tools protect electronic components from damage.
Product dimensions: 119 x 111 x 18 mm (LxWxD)
Application: Mainly for precision gripping and bending work.
Standards: DIN ISO 9655.
IEC 61340-5-1.
Increases your efficiency: Extra-long plier head for inserting low-lying components.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Lowers your costs: Durable thanks to high-quality, chrome-plated plier surface to prevent corrosion.
Product dimensions: 270 x 100 x 39 mm (LxWxD)
Application: For all fitting, gripping and adjustment tasks, as well as cutting to length of live parts up to 1,000 V AC.
Standards: DIN ISO 5745.
Cutting, bending, gripping - also in difficult-to-access spots
Kind to hands and muscles
Safe operation up to 1,000 V AC
Often, thick wires must be securely held and shaped at the same time, which requires a high bending force. The needle nose pliers from Wiha are the solution for all fitting, gripping and adjustment tasks. The toothed gripping surface ensures that all components, wires or cables can be easily and comfortably held in place. In addition, the long, pointed and flat rounded jaws that are angled at 40°allow the secure insertion of low-lying components. What's more, the cutting edges located behind them allow cutting soft, medium-hard and hard wires to length. The ergonomically shaped plier handle ensures comfortable, fatigue-proof work. The cutting edges that are inductively hardened to approx. 64 HRC and the high-quality C 70 tool steel contribute to a long tool life. The insulated needle nose pliers are subject to routine testing as per the international IEC 60900 standard, thus ensuring safe work on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Product dimensions: 146 x 29 x 29 mm (LxWxD)
Application: For working on electrostatically sensitive components.
Application: With integrated CentroFix bit holder, suitable for all bits and bit drills with the style C 6.3, E 6.3 or double bits.
Bit chuck: Stainless steel.
Extra: True single-handed operation, extremely high retention force of bits (up to 20 kg) and virtually no play between bit and holder thanks to special closing and holding mechanism.
Supplementary information: Handle: IEC 61340-5-1
Handle: Surface resistance 10^6 - 10^9 ohms.
Standards: for bits DIN 3126, ISO 1173, form C6.3 and E6.3
Lowers your costs: Prevents damage caused by lost circlips in the work area.
Saves time: Safe and sturdy grip on circlips.
Product dimensions: 306 x 64 x 16 mm (LxWxD)
Application: For inserting / removing circlips from inside bores.
Supplementary information: with safety latching function MagicTips®
DIN ISO 5256.
Meets your requirements: Permanently stable through box joint with double guidance.
Product dimensions: 310 x 80 x 31 mm (LxWxD)
Application: For gripping and holding pipes and angular profiles as well as hexagon nuts in installations.
Material: High quality chrome vanadium molybdenum steel, tempered.
Installation projects often involve pipes, nuts, as well as rounded and edged materials in a variety of dimensions. Water pump pliers offer the optimal grip for all occasions. With a 9-step detent adjustment it offers maximum variability when working in the installation area. Crushing injuries are prevented thanks to the integrated clamping protection. Double guidance based on a box joint ensures the greatest stability of the pliers. At the same time, the slim design in the head and joint area provides reliable access to the work piece, even in confined areas. The handles of the pliers are made of anti-slip plastic and offer users a strong grip, even in oily or wet work situations. What is more, the ergonomically shaped pliers handle ensures comfortable, fatigue-proof work. In addition, slipping off the work piece is prevented by the self-clamping on pipes and nuts, thus enabling highly comfortable work. When in use, the high-quality specially hardened teeth guarantee a reliable secure grip with long-term durability. The robust water pump pliers are dirt resistant.
DIN ISO 8976.
Increases your efficiency: Two pliers in one - 200 % power at the touch of a button, available at any time.
Protects your health: Requires less force and reduces pressure on the wrists.
Product dimensions: 210 x 54 x 20 mm (LxWxD)
Application: For cutting various materials from soft to extremely hard, such as cables, nails, screws, bolts, wire cable, spring wire, chains, etc.
Head shape: Semi-circular.
Material: Hard as steel - Drop forged of high-quality C70 steel.
Based on DIN ISO 5749.
Simplifies your work: Up to 40% more cutting force thanks to optimised leverage.
Protects your health: Reduces strain from continuous work thanks to opening spring.
Protects your health: Special DynamicJoint® design reduces effort required for cutting.
Lowers your costs: Durable thanks to high-quality, chrome-plated plier surface to prevent corrosion.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Product dimensions: 250 x 100 x 35 mm (LxWxD)
Application: Power-assisted all-round diagonal cutter for cutting soft to extremely hard wires and cables.
Standards: Manufactured acc. to IEC 60900.
Precise and clean cutting of soft and hard wire
Special DynamicJoint® joint design and optimized lever transmission for up to 40% more power
With switchable opening spring
Kind to hands and muscles
Safe operation up to 1,000 V AC
Cutting cables and wires to length in continuous use requires a great deal of force and causes considerable strain on wrists. Wiha heavy-duty diagonal cutters with a two-component handle provide effortless cutting for heavy duty use. The power joint with DynamicJoint® ensures that the hand force is optimally transferred to cutting surfaces, providing up to 40% greater cutting force. Its opening spring can be switched on and off, which allows the user to work effortlessly for long periods of time. With their semi-circular head, these powerful pliers also guarantee a clean cut edge. The ergonomically shaped plier handle ensures comfortable, fatigue-proof work. The cutting edges that are inductively hardened to approx. 64 HRC and the high-quality C 70 tool steel contribute to a long tool life. In addition, the heavy-duty diagonal cutters are manufactured as per the international standard IEC 60900 and are thus approved for work on live parts up to 1,000 V AC.
To benefit from this product for as long as possible, we recommend regularly applying a drop of oil after use.
DIN ISO 5749.
Increases your efficiency: The all-rounder with 120x greater lifespan* thanks to patented bit technology, suitable for all screws. (*compared to Wiha standard bit)
Lowers your costs: Bit quick and easy to find thanks to red marking - even in dark environments by using an UV light.
Saves time: Automatic opening at the push of a button and simple bit change directly in the holder.
Saves time: No long searches thanks to fluorescent bit, infrequent bit replacement thanks to long lifespan.
Product dimensions: 187 x 110 x 25 mm (LxWxD)
Application: Suitable for all types of screws. Also suitable for power tools and impact screwdrivers
Standards: DIN ISO 2351-3
For Impact screw connections in wood and metal
Single-hand operation - simple and quick bit removing and returning
Patented bit technology for 120x increased service life
Easy to find in the dark with UV light
With 7 bits and bit holder
Tired of having no hand free and searching for the right bit in vain? The Wiha BitBuddy® allows you to position bits directly in the machine and return them to the holder easily. The pioneering arrangement of bits in the holder and the lasered profile size on the bit base ensure that it is extremely simple to select the right size when removing the bit from the holder. Universal in its use, the multitalented TY bit is suitable for all types of screws - both T-shaped and Y-shaped screws - and thus the ideal tool for fastenings in all kinds of materials. Thanks to its patented torsion zone, the bit is also suitable for power tools and impact screwdrivers and guarantees a 120x greater lifespan compared to Wiha standard bits. The coloured bits are also quick and easy to find, even in the dark by using an UV light, thanks to its fluorescent coating. This reduces the number of bits which are lost and saves on the expense of acquiring new ones.
DIN 3126, ISO 1173, Style E6,3
Increases your efficiency: The all-rounder with 120x greater lifespan* thanks to patented bit technology, suitable for all screws. (*compared to Wiha standard bit)
Lowers your costs: Bit quick and easy to find thanks to red marking - even in dark environments by using an UV light.
Saves time: Automatic opening at the push of a button and simple bit change directly in the holder.
Saves time: No long searches thanks to fluorescent bit, infrequent bit replacement thanks to long lifespan.
Product dimensions: 187 x 110 x 25 mm (LxWxD)
Application: Suitable for all types of screws. Also suitable for power tools and impact screwdrivers
For Impact screw connections in wood and metal
Single-hand operation - simple and quick bit removing and returning
Patented bit technology for 120x increased service life
Easy to find in the dark with UV light
With 7 bits and bit holder
Tired of having no hand free and searching for the right bit in vain? The Wiha BitBuddy® allows you to position bits directly in the machine and return them to the holder easily. The pioneering arrangement of bits in the holder and the lasered profile size on the bit base ensure that it is extremely simple to select the right size when removing the bit from the holder. Universal in its use, the multitalented TY bit is suitable for all types of screws - both T-shaped and Y-shaped screws - and thus the ideal tool for fastenings in all kinds of materials. Thanks to its patented torsion zone, the bit is also suitable for power tools and impact screwdrivers and guarantees a 120x greater lifespan compared to Wiha standard bits. The coloured bits are also quick and easy to find, even in the dark by using an UV light, thanks to its fluorescent coating. This reduces the number of bits which are lost and saves on the expense of acquiring new ones.
DIN 3126, ISO 1173, Style E6,3