Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
- for fine cutting work, e.g. in electronics and fine mechanics
- Load-optimised for a m ore direct feel when working
- sturdy, zero-backlash box joint
- low-friction double spr ing for gentle and even opening
- the polish or mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools
- Cutters additionally laser hardened, cutter hardness at least 62 HRC
- High, slim sleeves for fine and comfortable gripping between thumb and index finger
- round head, with small beve l and lead catcher - no uncontrolled loss of cut wire ends
- cutting edge hardness approx. 62 HRC
- with precision cutting edges for soft, hard and piano wire
- cuts bolts, nails, rivets , etc. up to Ø 5.2 mm
- efficient joint design ensures exceptional cutting performance with li ttle effort
- cutting edges additionally induction-hardened, cutting edge hardness approx. 64 HRC
- Micro-structured cutting edge reduces slipping of the material from the jaws
- Wit h gripping surface below the joint for gripping and pulling wires from Ø 1.0 mm
- with slim mu lti-component grips without collar for better handling and easier transport
- Opening spring a nd locking device are integrated in the handles for comfortable work and safe transport
- high transmission ratio for easy cutting
- requires 50 % less effort compared with con ventional combination pliers due to optimised transmission ratio
- solid construction for heav iest strain
- universally applicable
- ergonomically optimised handle shape for firm co ntact to the hand and fatigue reducing operation
- particularly effective cross-hatched knurle d gripping zone in the jaws - for strong gripping and pulling
- additional gripping zone below the joint for powerful leverage and pressing performance
- with cutting edges for soft and ha rd wire
- cutting edges additionally induction-hardened, cutting edge hardness approx. 62 HRC< /li>
- American style
- with fish tape puller in the joint gap
- with universal mandrel crimping point below the joint
- for powerful cutting of larger cross-sections as well as very hard materials
- two-han d operation for maximum cutting force
- 60% less effort required compared to conventional high -leverage diagonal cutters
- 40-fold increase of manual force due to special joint design
- With gripping surface below the joint for gripping and pulling wires from Ø 1.0 mm
- induc tion-hardened precision blades: cutting edge hardness approx. 64 HRC
- Straight cutting edges for easier cutting of flat material, also suitable for thin round material
- for data cables in telecommunication and networks
- For shielded and unshielded Wester n plugs RJ45 (8P8C)
- With adjustable retaining bracket, for all common RJ45 plugs with closed and non-closed housings
- Separate crimping die for strain relief (cable clip)
- Quick cutting and stripping of CAT-cables with high-quality blades
- Precise crimping process thanks to parallel crimping
- Repetitive, high crimping quality due to ratchet mechanism (unlockable )
- optimum transmission of force due to lever action for fatigue-reduced operation
- For reliable tool protection: holding capacity tested in numerous drop tests for tools up to 6 kg, even battery-operated tools
- Large working radius: long lanyard for convenient working
- Reduces the risks of tool loss, injury to living beings and damage to objects
- To me et regulations while working at heights, for example industrial climbing, arborists, rescue services , at sea, etc.
- Tether can be attached directly to the cord side or the carabiner to climbing equipment
- The roughly 90 cm long gathered fabric strap tether stretches to a length of abou t 1.5 m when weight is applied
- with strap made of a flat belt sewn to one end and a cord and cord stopper sewn into the other end, each sewn four times
- The additional loop on the lanya rd allows for direct connection of the tool to the climbing equipment with a carabiner (sold separat ely)
- Cord stopper made of solid aluminium, also available as a spare part
- For KNIPEX pliers with tether attachment point only with 1.5 kg adapter strap 00 50 02 T
- No PPE (perso nal protective equipment): not suitable for personal safety!
- Contents: lanyard 00 50 10 T, w ith fixed equipment carabiner 00 50 03 T
Meets your requirements: Yellow hammer head / medium-hard: e.g. for tool and machine engineering, car repairs, sheet metal and assembly work.
Simplifies your work: Makes work easier, optimum impact effect and less effort needed.
Protects your health: Deadblow Hammering without recoil minimises loads on joints, tendons and muscles.
Lowers your costs: Ergonomic hickory wooden handle and hammer head both available as spare parts.
Product dimensions: 380 x 130 x 45 mm (LxWxD)
Application: Ideal for delivering measured positioning blows on components such as work pieces in machine vices or for installation work. Medium-hard hammer heads eminently suitable for tool and machine engineering, car repairs as well as sheet metal and assembly work.
Yellow hammer face (medium-hard) for tool manufacture / mechanical engineering, automobile sector, or sheet metal and assembly work
Hammering without recoil minimizes stress on joints, tendons, and muscles
Optimum impact effect without recoil minimizes effort and reduces the risk of injury
Hickory-wood handle and hammer faces available separately as spare parts
Especially on delicate surfaces, choosing the right hammer is crucial to avoid damage. The recoilless, soft-faced hammer with hickory-wood handle makes it possible for the user to deliver measured positioning blows and protects delicate surfaces and edges due to its high-impact effect. Thanks to the special metal filling in the hammer head, the soft-faced hammer also guarantees absolutely no recoil, thus protecting joints. In addition, the approx. 25% greater mass of the hammer head ensures added power and easier work, optimum impact effect, and less effort needed as a result. The hammer also stands out thanks to its high-grade hickory-wood handle with a highly effective non-slip surface. The yellow, medium-hard hammer faces with a diameter of 50 mm are ideal for universal use in areas like tool making and mechanical engineering as well as sheet metal and assembly work. The hammer faces and the ergonomic hickory-wood handle are available as spare parts.
GS tested.
Increases your efficiency: Narrow, pointed plier head guarantees optimal accessibility even to areas that are difficult to access.
Protects your health: Reduces strain from continuous work thanks to opening spring.
Lowers your costs: Electrostatically conductive tools protect electronic components from damage.
Product dimensions: 106 x 92 x 18 mm (LxWxD)
Application: For virtually flush cutting copper wire in flat places which are difficult to access.
Standards: IEC 61340-5-1.
DIN ISO 9654.
Meets your requirements: For completely flush cutting of soft copper wires.
Protects your health: Reduces strain from continuous work thanks to opening spring.
Lowers your costs: Electrostatically conductive tools protect electronic components from damage.
Product dimensions: 170 x 100 x 28 mm (LxWxD)
Application: For absolutely flush cutting of copper wire.
Standards: IEC 61340-5-1.
DIN ISO 9654.