Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
- For reliable tool protection: holding capacity tested in numerous drop tests for tools up to 6 kg, even battery-operated tools
- Large working radius: long lanyard for convenient working
- Reduces the risks of tool loss, injury to living beings and damage to objects
- To me et regulations while working at heights, for example industrial climbing, arborists, rescue services , at sea, etc.
- Tether can be attached directly to the cord side or the carabiner to climbing equipment
- The roughly 90 cm long gathered fabric strap tether stretches to a length of abou t 1.5 m when weight is applied
- with strap made of a flat belt sewn to one end and a cord and cord stopper sewn into the other end, each sewn four times
- The additional loop on the lanya rd allows for direct connection of the tool to the climbing equipment with a carabiner (sold separat ely)
- Cord stopper made of solid aluminium, also available as a spare part
- For KNIPEX pliers with tether attachment point only with 1.5 kg adapter strap 00 50 02 T
- No PPE (perso nal protective equipment): not suitable for personal safety!
- Contents: lanyard 00 50 10 T, w ith fixed equipment carabiner 00 50 03 T
Meets your requirements: Blue hammer head / soft: e.g. for furniture work and interior decorating, minor assembly. Yellow hammer head / medium-hard: e.g. for tool and machine engineering, car repairs, sheet metal and assembly work.
Simplifies your work: Makes work easier, optimum impact effect and less effort needed.
Lowers your costs: Ergonomic hickory wooden handle and hammer head both available as spare parts.
Product dimensions: 360 x 131 x 57 mm (LxWxD)
Application: Ideal for delivering measured positioning blows on components such as work pieces in machine vices or for installation work. Medium-hard hammer faces are eminently suitable for tool making and mechanical engineering, car repairs, and sheet metal and assembly work. Soft hammer faces for furniture manufacturing and interior fitting or minor assembly work.
Yellow hammer face (medium-hard) for tool manufacture / mechanical engineering, automobile sector, or sheet metal and assembly work
Blue hammer face (soft) for furniture manufacturing and interior fitting or minor assembly work
Recoiling impact effect minimizes the effort in a series of impacts
Protects the material being processed thanks to safety hammer faces
Hickory-wood handle and hammer faces available separately as spare parts
Depending on the site of operation, different hammer heads are needed to meet the specific requirements of various tasks. The recoilless, soft-faced hammer with hickory-wood handle makes it possible for the user to deliver measured positioning blows and protects delicate surfaces and edges due to its high-impact effect. Thanks to the special metal filling in the hammer head, the soft-faced hammer also guarantees absolutely no recoil, thus protecting joints. In addition, the approx. 25% greater mass of the hammer head ensures added power and easier work, optimum impact effect, and less effort needed as a result. The Safety Hammer is also distinguished by its high-grade hickory hammer handle with highly effective non-slip surface. The yellow, medium-hard hammer face with a diameter of 30 mm is ideal for universal use in areas like tool making and mechanical engineering as well as sheet metal and assembly work. The blue, soft hammer face also with a diameter of 30 mm is suitable for furniture manufacturing and interior fitting as well as minor assembly work. The hammer faces and the ergonomic hickory-wood handle are available as spare parts.
GS tested.
Meets your requirements: Black hammer head / medium soft: e.g. for paving, tiling, dry wall construction. White hammer head / very hard: e.g. for building and construction, mould construction, road construction, gardening and landscaping.
Simplifies your work: Makes work easier, optimum impact effect and less effort needed.
Lowers your costs: Ergonomic hickory wooden handle and hammer head both available as spare parts.
Product dimensions: 360 x 131 x 57 mm (LxWxD)
GS tested.
Increases your efficiency: Narrow, pointed plier head guarantees optimal accessibility even to areas that are difficult to access.
Protects your health: Reduces strain from continuous work thanks to opening spring.
Lowers your costs: Electrostatically conductive tools protect electronic components from damage.
Product dimensions: 113 x 108 x 19 mm (LxWxD)
Application: For cutting different hardnesses of wires in places which are difficult to access.
Standards: IEC 61340-5-1.
DIN ISO 9654.
Meets your requirements: For cutting wires of various hardness levels.
Protects your health: Reduces strain from continuous work thanks to opening spring.
Lowers your costs: Electrostatically conductive tools protect electronic components from damage.
Product dimensions: 119 x 85 x 19 mm (LxWxD)
Application: All round electronic diagonal cutter for cutting wires of different hardnesses.
Standards: IEC 61340-5-1.
DIN ISO 9654.
Increases your efficiency: Wiha needle nose pliers with extra-long plier head for inserting low-lying components.
Protects your health: Special DynamicJoint® design reduces effort required for cutting.
Increases your safety: Wiha combination pliers enable safe, non-slip gripping in all work situations.
Product dimensions: 353 x 237 x 44 mm (LxWxD)
Application: The basic equipment for different jobs and different locations.
3-part set: Combination pliers, needle nose pliers, diagonal cutters
DynamicJoint® - Innovative unique joint design
No twisting or slipping
Different pliers are required for work at different points of use. The Classic pliers set from Wiha contains combination and needle nose pliers, as well as diagonal cutters, which constitute the perfect basic equipment for every tradesman. With the Wiha OptiGrip function, the combination pliers allow secure gripping without slipping. The needle nose pliers are perfect for inserting low-lying components, as well as holding, bending and cutting wires. Also contained in the set, the diagonal cutters impress as a universal cutter to slice soft and hard wires. Its special DynamicJoint® joint design also reduces effort required for cutting.
Combination pliers DIN ISO 5746
Gripping and cutting pliers: DIN ISO5749 and DIN ISO 5745
Content:
- 1x Combination pliers Classic with DynamicJoint® and OptiGrip with extra long cutting edge 180 mm, 7" (10335)
- 1x Diagonal cutters Classic with DynamicJoint® 160 mm, 6 1/2" (43332)
- 1x Classic needle nose pliers with cutting edge straight shape 160 mm, 6 1/2" (26718)
Lowers your costs: Prevents damage caused by lost circlips in the work area.
Saves time: Safe and sturdy grip on circlips.
Product dimensions: 282 x 178 x 34 mm (LxWxD)
Application: For fitting / removing circlips externally to / from shafts or axles.
Supplementary information: with safety latching function MagicTips®
DIN ISO 5254.
Meets your requirements: Permanently stable through box joint with double guidance.
Increases your efficiency: Fast and simple adjustment of pliers with push button.
Product dimensions: 370 x 100 x 35 mm (LxWxD)
Application: For gripping and holding pipes and angular profiles as well as hexagon nuts in installations.
Material: High quality chrome vanadium molybdenum steel, tempered.
Turning, pulling, gripping and holding of e.g. pipes or tightening screws and nuts
9-level gradation - flexible adjustment of the gripping width at the push of a button
Secure hold on the workpiece thanks to self-clamping
Highest stability thanks to a box type joint
Kind to hands and muscles
Installation projects often involve pipes, nuts, as well as rounded and edged materials in a variety of dimensions. Water pump pliers offer an optimum grip for all occasions. With a 9-step detent adjustment, it offers maximum variability for work in the installation area, where it can be quickly and easily adjusted and locked at the push of a button. Crushing injuries are prevented thanks to the integrated clamping protection. The pliers are equipped with a box-type joint, which ensures maximum stability due to the double guidance. At the same time, the slim design in the head and joint areas provides easy access to the workpiece, even in confined work areas. The handles of the pliers are made of anti-slip plastic and offer users a strong grip, even in oily or wet work situations. What's more, the ergonomically shaped pliers handle ensures comfortable, fatigue-proof work. In addition, slipping off the work piece is prevented by self-clamping on pipes and nuts, thus enabling highly comfortable work. When in use, the high-quality specially hardened teeth guarantee a reliable, secure grip with long-term durability. The high-quality chrome vanadium molybdenum steel guarantees robustness and a long service life. The robust water pump pliers are dirt-resistant.
To benefit from this product for as long as possible, we recommend regularly applying a drop of oil after use.
DIN ISO 8976.